GB-15
EC
Hydro
Midsize
MAINTENANCE
The maintenance schedule detailed is for average
operating conditions. Under extreme conditions
(dusty, dirty or more than 8 hrs continuous use)
maintain more frequently.
Engine (daily)
Check the engine for oil leaks.
Cooling Fins and Air Intake screen (daily)
Ensure that the cooling fins and air intake screen I
are cleaned daily. Continued operation with a
clogged cooling system will cause severe overheating
and result in engine damage.
Air Cleaner (every 25 hours)
Service more frequently if operating in very dusty or
dry conditions. Extensive damage will result from
operating with a dirty air cleaner.
1. Remove the air cleaner cover by releasing
latches L.
2. Remove the foam precleaner P by sliding it off
the paper cartridge. Wash in kerosene or
detergent and water. Dry thoroughly. Saturate in
engine oil. Squeeze to remove excess oil.
3. Reinstall all parts.
NOTES:
• Every 50 hours remove the paper element by
loosening wing nut W. If dirty, replace.
• DO NOT use petroleum solvents to clean the
paper element. They may cause it to deteriorate.
• DO NOT use pressurized air to clean or dry
element.
• See the Setup, Parts & Maintenance manual for
service part numbers.
In-Line Fuel Filter
When required, the fuel filter B may be replaced. See
the Setup, Parts & Maintenance manual for service
part numbers.
To Next Page
Loading...
Need help?
General
