Need help?Do you have a question about the Thales Cinterion LGA DevKit Series and is the answer not in the manual?
Lists the key features and advantages of the LGA DevKit.
Details which Cinterion modules are compatible with the DevKit.
Describes what is included in the LGA DevKit package.
Provides instructions on how to physically attach the socket.
Identifies physical components and connectors on the DevKit.
Illustrates the internal architecture and data flow of the DevKit.
Explains the two USB interfaces for power and communication.
Details the SIM card holder and its connection to the module.
Describes the pin headers for module connections and peripherals.
How to start, stop, and power cycle the module.
Instructions for resetting the module using the RST button.
Configures the UART interface selection (USB VCP or RS232).
How to choose between USB and external power sources.
Details the use of level shifters for signal compatibility.
Explains the meaning of the various LEDs on the DevKit.
Describes the patch field for adding components.
Information on antenna interfaces and connections.
Details power input options and supply capabilities.
Guide for using the DevKit with the DSB-Mini.
Guide for using the DevKit with the DSB75.
Specific configuration for BGS1 and BGS2 modules.
Specific configuration for BGS12 module startup.
Configuration for EMS31 SIM interface pull-up resistor.
Configuration for ENS22 firmware updates and LEDs.
Tracks changes and updates across document versions.
Lists other relevant documentation for Thales modules.
Essential safety guidelines for using the DevKit.
Details on the DevKit's compliance status and intended use.
Technical details specific to the LGA DevKit SM variant.
Technical details specific to the LGA DevKit L variant.
Lists known issues, limitations, and solutions.
General| Brand | Thales |
|---|---|
| Model | Cinterion LGA DevKit Series |
| Category | Microcontrollers |
| Language | English |
To Next Page