Theben KNX Series User Manual

The application programmes RAMSES 718 P/S
RAMSES 718 P / RAMSES 718 S 57
Designation
Values
Description
Send cyclically
no
yes, always
only if input = 1
only if input = 0
When should be sent cyclically?
The cycle time is set on the main
parameter page of the channel.
Response after
restoration of the bus
supply
none
Do not send.
update (immediately)
update (after 5 s)
update (after 10 s)
update (after 15 s)
Send update telegram
immediately or with delay.
Response when setting
the block
Ignore block
The block function is ineffective
with this telegram.
no response
Do not respond when setting the
block.
as with input = 1
Respond as with rising edge.
as with input = 0
Respond as with falling edge.
Response when
cancelling the block
no response
Do not respond when the block is
cancelled.
update
Send update telegram.
 If a channel is blocked, no telegrams will be sent cyclically.

Theben KNX Series Specifications

General

Communication Protocol	KNX
Ambient Temperature	-5°C to +45°C
Storage Temperature	-25°C to +70°C
Protection Class	IP20
Relative Humidity	5% to 95%, non-condensing
Operating Voltage	24 V DC (via KNX bus)