Next, allocate capacity for iSCSI thin-provision volume by dragging the Allocation
bar to the desired size.
After the size has been determined, click OK to confirm. Now you will see the iSCSI
thin-provisioning volume is available from the list. Please refer to the screenshot
below.
Unlike creating “Instant Allocation” iSCSI target volumes which capacity has been
physically allocated! With the iSCSI target volume creation under thin-provisioning
can virtually be up to 16384GB (16TB).
LUN ACL(For the N8900)
After iSCSI target has been created, one more step away to complete iSCSI volume
can be used. Under “LUN ACL”, it needs to add “Initiator iqn” and setup ACL access
privilege to determine the accessibility. Please refer the screen shot below for where
“Initiator iqn” can be getting it from.
To Next Page
Loading...
Need help?
General
