The accessible Initiator will listed as screen shot displayed below.
The listed “Initiator iqn” can be modified or deleted by selecte desired iqn and apply
by associated button.
Advance Option(For the N8900)
There are 3 options is currently allow Admin to Enable/Disable to operate Thecus IP
storage associated with iSCSI setting. The details as listed in following screenshot.
With the option changed, it will need to reboot system to activate.
iSCSI CRC/Checksum
To enable this option, the initiator can connect with “Data digest” and “Header
digest” enabled.
To Next Page
Loading...
