Syslog Management
Generates system log messages for the syslog server.
These messages are stored on your NAS in: Nsync > log> messages.
Information can be obtained in two ways: locally and remotely.
Local Access - When Local is selected, log messages can be viewed directly
through samba. However, to access the Nsync folder through samba, the folder
must be set as browseable and the user must be given ACL permissions. In OS X,
UNIX extensions must be disabled under Network Service > Samba/CIFS in the UI.
Remote Access - They can also be viewed remotely by selecting Remote and
inputting a Remote IP Address into the input field. This will allow a TFTP program,
such as TFTPd32, to access the system log remotely from a computer.
System Management
The System Management menu gives you a wealth of settings that you can use to
configure your Thecus IP storage system administration functions. You can set up
system time, system notifications, and even upgrade firmware from this menu.
To Next Page
Loading...
Need help?
General
