From the figure above, the Export share name is “pmmeeting”. The figures below
show the result before and after via Microsoft Network Access with settings have
been completed.
The Browseable setting will be same method of setting for system share folder. It
designates whether or not this folder will be visible through web disk. You may refer
the figures below for reference when Yes and No are selected.
The Public setting will be set same as what the setting for the system share folder
associated with the ACL permission setup. If Public is set to Yes, all users will be
No Stack Target
Stack target with export
share name “pmmeeting”
To Next Page
Loading...
Need help?
General
