6. Specify a stripe size — 64K is the default setting.
7. Specify the percentage allocated for user data by drag the horizontal bar.
The remaining space will be made available for iSCSI.
8. Selected the file system you like to have for this RAID volume. The selection
is available from ext3, XFS and ZFS. N8900 support ext3, XFS and ext4.
9. Press Create to build the RAID storage volume.
NOTE
．Select ZFS file system while snapshot is needed. It is only one ZFS file system
allowed to be created per system.
．ZFS file system is only accessible by CIFS/SMB, not for AFP and NFS users.
．XFS file system is not support folder quota feature
To Next Page
Loading...
