Thermal Dynamics CutMaster 100 User Manual

Operating Manual
Plasma Cutting
Power Supply
CutMaster™ 100
March 22, 2004 Manual No. 0-2859
A-02991

Thermal Dynamics CutMaster 100 Specifications

General

Brand	Thermal Dynamics
Model	CutMaster 100
Category	Power Supply
Language	English

Summary

Section 1: General Information

1.01 Notes, Cautions and Warnings

1.02 Important Safety Precautions

1.07 Declaration of Conformity

Section 2: Introduction

Section 3: Installation Procedures

3.01 Introduction

Outlines the steps for installing the power supply and connecting the torch.

3.02 Site Selection

Guidelines for choosing a suitable, safe, and well-ventilated location.

3.05 Primary Input Power Connections

Instructions for connecting the power supply to the primary input power source.

3.06 Gas Connections

Procedures for connecting the gas supply to the power supply.

Section 4: Operation

4.01 Introduction

4.02 Product Features

4.03 Preparations For Operating

4.04 Sequence of Operation

Section 5: Customer & Operator Service

5.01 Introduction

Covers basic maintenance procedures for operating personnel.

5.02 General Maintenance

Details routine maintenance checks and procedures for the unit.

5.03 Common Faults

5.04 Basic Troubleshooting Guide

Section 6: Parts Lists