Comfort adjustment, to change temperature
Comfort adjustment means moving the whole curve upwards or downwards.
Drag clockwise or anticlockwise to raise or lower the offset. Each point
represents an increase/decrease of approximately 1°C on the supply
line temperature.
Alternatively, press
or
NOTE: This option should be primarily used for temporary temperature adjustments. When permanently
changing the indoor temperature for a more precise indoor climate, change the heat curve settings.
5.2 Adjusting the Heat Curve
The Curve indicator has two modes that can be toggled by pressing the Curve indicator symbol.
When lit, the curve is adjusted as one unit.
When not lit, individual curve points can be moved separately.
1. Press on the Start screen to open the Menu screen.
2.
Press
3.
Press if the Heat curve is not shown.
4. There are two ways of adjusting the heat curve:
▪
If the Curve indicator
is lit, press or to adjust the
entire curve.
Or:
▪
If the Curve indicator
is not lit individual points can be
moved separately by pressing and to the desired
temperature.
5.
Confirm the new selection by pressing
User Guide Mega
VUJSC302 Thermia Värmepumpar
12
To Next Page
Loading...
Need help?
General
