5.6 Distribution circuits
Distribution circuit 1 is available from factory. Distribution circuits 2-5 require an expansion module, separately
sold as accessory.
Up to 5 distribution circuits can be active simultaneously.
Example of settings for distribution circuit 1:
1. Press in the upper left corner of the Start screen
2.
Press
3. Press text for desired distribution circuit.
4. Page 1:
Settings for max/min supply temperature.
NOTE! The distribution circuit settings can not exceed the values set in the main heat curve.
Confirm the settings with
5. Page 2:
Settings for supply temperature at different outdoor temperatures.
NOTE! The distribution circuit settings can not exceed the values set in the main heat curve.
The temperature can be adjusted in two ways:
User Guide
Mega
Thermia Värmepumpar VUJSC302
17
To Next Page
Loading...
Need help?
General
