As the outlet not only functions as an overflow but also as a vent, it must be unsealed while
the unit is in operation.
To drain the empty filling canister, place it on the floor and connect it using the quick-
release coupling (9). Take care that the filling canister does not overflow. Disconnect the
quick-release coupling if necessary.
Always drain the water reservoir before transporting the unit.
Mains switch
0
I
Unit OFF
Unit ON (the green indicator lamp (3) indicates that unit is ready for operation).
Fig. 5: Mains switch (8)
6. OPERATE
50 079 041 17/45
To Next Page
Loading...