Components Material
Outer housing Galvanized sheet steel, painted to RAL 9002
Inner vessel, shelves Stainless steel, material No. 1.4301
Glass pane Sodium silicate glass
Door seal of unit Magnetic core sheathed in soft PVC
Glass door seal Tempered silicon
Thermal insulation PU foam sheet (CFC) incorporating non-woven needled
glass fibre quilt (binder-free)
Control and display membrane Polyethylene
Heating systems Silicon-sheathed resistance heating conductor and tubu-
lar heater
Leads Plastic-sheathed copper strands
Other components Sheathed electrical components coated in various plas-
tics partly mounted on printed circuit boards bonded with
epoxy resin
Disposal
WEEE Compliance:
This product is required to comply with the European Union‘s Waste Electrical & Electronic Equipment
(WEEE) Directive 2002/96/EC. It is marked with the following symbol:
Thermo Electron Corporation has contracted with one or more recycling/disposal companies in each EU
Member State, and this product should be disposed of or recycled through them. Further information on
Thermo Electron`s compliance with these Directives, the recyclers in your country, and information on
Thermo Electron products wich may assist the detection of substances subject to the RoHS Directive are
available at www.thermo.com/WEEERoHS.
13. MATERIALS USED / DISPOSAL
40/43
50 079 041
To Next Page
Loading...