Thermo Scientific HyPerforma G3Pro Universal Bioreactor Controller User’s Guide | 1
Warnings, safety, and warranty information
Warnings, safety, and warranty
information
Thank you for purchasing this high-quality Thermo Scientific
™
equipment. We have included safety information in this guide, based
on our knowledge and experience. It is important, however, for you
to work with your safety management personnel to ensure that this
equipment is integrated into your safety practices. Please take some
time to perform your own job safety analysis in order to identify and
control each potential hazard.
WARNING: Read and understand this user’s guide before using
this equipment.
The Thermo Scientific
™
HyPerforma
™
G3Pro
™
Universal Bioreactor
Controller is designed to be operated under traditional pharmaceutical
conditions. A general understanding of mixing systems and their
operation is important prior to using the system for the first time. Read
and understand the user’s guide before operating; failure to do so
could result in injury, loss of product, and/or voiding of the product
warranty.
WARNING: Use ladders and elevated platforms with caution.
A few operations may require the use of a ladder or platform. Before
use, ensure the ladder has been inspected and weight-rated for its
user. When using a ladder or platform, be sure it is stable, maintain
three points of contact, and make sure the steps are clean.
WARNING: Follow lockout/tagout procedures.
To prevent injury, when servicing equipment, use your company’s
lockout/tagout procedures to isolate electrical, mechanical, pneumatic,
hydraulic, chemical, thermal, gravitational, or any other potential energy
and protect workers from the release of hazardous energy.
WARNING: Hazardous voltage inside.
There is a risk of electrical shock and injury. Disconnect power before
opening electrical components. Service should be performed only by
Thermo Fisher Scientific service personnel.
To Next Page
Loading...