Thermo Scientific HyPerforma G3Pro Universal Bioreactor Controller User’s Guide | 28
2.4.3 System assembly
The utility tower should be powered o during assembly and installation
of the other system components. The main power cable should be
disconnected from the wall plug or any other source of electricity. The
cables to the other components should also be disconnected.
All cabling should be protected from moving parts, foot trac,
chairs/stools, and any other source of abrasion that might compromise
the cable integrity. Damage to the cables will result in system
malfunction.
Chapter 2 | Gas and liquid handling
To Next Page
Loading...