07
★ Manual Power On/Off - Switching the camera OFF manually and pulling off the car charger
is required for vehicles where the vehicle’s power socket provides continuous power after the
engine is turned OFF.
· To turn the power off manually, press and hold the power button for at least 3 seconds until the
camera is powered off.
· To turn the camera on manually, press and hold the power button for at least 3 seconds until the
camera is powered on.
3. Video Mode
Automatic Video Recording - When powered by car charger, the dash cam will automatically
turn on and start recording when car is started. Press OK Button to stop recording.
Manual Video Recording - When battery powered (not connected to car charger), turn on the
dash cam by pressing and holding the POWER button. Press the OK button to start/stop
recording.
To Next Page
Loading...
