20
④ Beep Sound
This setting enables/disables a beep sound when you press any button on the camera.
Default value: ON
⑤ Language
This setting determines the language used for dash cam setting and interface.
Default value: English
⑥ Screen Rotation
This setting enables the screen rotating when you turn the camera upside down. Default value: Off
⑦ Date/Time
Press Up/Down Button in System Setting to enter Date/Time
setting page, press OK Button to set Date/Time.
Set date firstly by pressing Up/Down button. Press OK Button after done and move the cursor to
the next spot on the right. Adjust date and hour/minute/second from top to bottom.
This setting is to set correct date and time on the dash cam for video recording and camera
shooting.
2019 / 02 / 03
05 : 11 : 43
To Next Page
Loading...
