SAFETY PRECAUTION
INITIAL USE
START CALIBRATION
TARGET PATTERN KIT
PRODUCT PROFILE
III
On Using Laser Devices
• The laser radiation can cause serious eye injury.
• Do not stare into the laser beam.
• Never look directly into the laser beam because it may cause damage to / destruction of the retina.
• Do not position the laser beam so that it unintentionally blinds you or others.
• Do not operate the laser level near children or let children operate the laser level.
• Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope, as
this will increase the level of eye injury.
• Do not remove or deface warning labels on the laser device.
• Do not disassemble the laser level, laser radiation can cause serious eye injury.
• Do not operate the laser in explosive atmospheres such as flammable liquids, gases or dust. Sparks
from the tool can cause ignition.
• Do not use solvents to clean the laser unit.
• Do not drop the unit.
• Remove the batteries if the laser / laser range finder will not be in use for a long period.
• Do not allow children to use the laser device as a toy.
• While installing a laser module, please make sure it is firmly and securely attached.
• The included goggles are intended to enhance the visibility of the Laser beam. They will not protect
your eyes against laser radiation.
.
INTENDED USE OF THE TOOL
The THINKCAR ADAS calibration tool is exclusively intended for use on a vehicle.
Do not use this tool outside of the designed intent. Never modify the tool for any other purpose or use.
PRODUCT INFORMATION
• As a flexible and portable ADAS calibration tool, it enables you to effectively and accurately calibrate a
wide range of camera-based driving assistance systems.
• Simple to fold/unfold and easy to operate.
THINKCAR ADAS Calibration Tool
Designed by
Thinkcar in California
To Next Page
Loading...
