THK KRF - Precautions to be Observed for Prevention of Product Fault or Fracture

6-2
KRF
6. Storage and Transportation
6.
Storage and Transportation
6-2
Precautions to be observed for prevention of product fault or fracture

Since using an adverse storage environment may cause fault, store the product in the
environment described below:
·
Place at ambient temperature within the following storage temperature range
Storage temperature : 0°C to 50°C
(Ambient humidity 80% RH or less, no freezing or condensation)
* With the product unpacked
· A place with non-corrosive gas nor ammable gas
· A place with little dust, salt or metallic powder
· A place with no exposure to water, oil or chemicals
· A place where a vibration or shock does not transmit to the main unit

This product is provided with antirust treatment and sealed before being packed.
When storing the product, enclose it in a package designated by THK and store it in
a horizontal orientation while avoiding high temperature, low temperature and high
humidity.

Do not apply an excessive load on the package, otherwise, it may cause fault or fracture.