THK KRF - How to Replace the Strip Seal

8.
Maintenance
8-21
KRF
8. Maintenance
8-7
How to replace the strip seal
[KRF3]
1. Remove the table cover.
Table cover
Model number Bolt size
KRF3 M2.6 × 4L
Thin head FH type head screws
2. Remove the springs (2 pcs.).
Spring
* Be careful not to lose the springs.
3. Remove the strip seal holder (on the motor side).
Strip seal holder
Model number Bolt size
KRF3 M2.6 × 4L
Thin head FH type head screws