8.
Maintenance
8-7
KRF
8. Maintenance
9. Put the side covers back in place.
Model number Bolt size Tightening torque [N·cm]
KRF3 M2.6 × 4L 30
Thin head FH type head screws
10. Place the strip seal guide and strip seal on the table.
Table
* Mount the strip seal holder, adjusting the table and strip seal so that they do not touch over
the entire stroke, and so that the strip seal does not lift.
Model number Bolt size Tightening torque [N·cm]
KRF3 M2.6 × 4L 30
Thin head FH type head screws
To Next Page
Loading...