Press the [FUNCTION] button to enter edit mode. Then press the B
b
0 key to assign the
[DATA CONTROL] to the left hand volume function.
Turn the rotary control [DATA CONTROL] until the desired value (0 – 127) is displayed,
while striking any piano key in the left area to hear the effect.
Press the [FUNCTION] button to enter edit mode. Then press the F
#
0 key to assign the
[DATA CONTROL] to the right hand volume function.
The display shows
.
Turn the rotary control [DATA CONTROL] until the desired value (0 – 127) is displayed,
while striking any piano key in the right area to hear the effect.
Press the [SPLIT] button. The display briefly shows und subsequently the name
of the currently selected voice.
The right hand voice will be transmitted on the main MIDI send channel.
The left hand voice will be transmitted on the main MIDI send channel +1.
For information on setting the main MIDI send channel, see Main MIDI send
channel (C
#
2),
Ä
Chapter 17 ‘MIDI functions’ on page 30.
Change the left hand volume
Change the right hand volume
Exit split mode
Split mode
digital piano
18
To Next Page
Loading...
Need help?
General
