12
Metronome
The built-in metronome supports you maintaining accurate timing. You can specify
time signature and tempo for the song to be recorded.
To turn the metronome on press the [METRONOME] button.
The display shows .
The tempo range of the metronome is 20 to 280 beats per minute (BPM). To change
the tempo just turn the rotary control [DATA CONTROL]. The display shows the
selected tempo.
The rotary control [DATA CONTROL] can be assigned to a variety of piano functions.
However, if you don't use the rotary control for 10 seconds, it returns to its default
function, i.e. metronome tempo.
Following time signatures are available: 2/2, 2/4, 3/4, 4/4, 5/4, 6/8, 7/8, 9/8 und 12/8.
To select the desired time signature, follow these steps:
n Press the [FUNCTION] button and press the piano key for the metronome time
signature E
b
1.
n Rotate the [DATA CONTROL] knob until the desired time signature is displayed. A
4/4-time is displayed as “4.4“.
Tempo and time signature can not be changed during recording.
Turn on
Set the tempo
Set the time signature
Metronome
DP-25
21
To Next Page
Loading...
Need help?
General
