13
Transpose
This function allows to raise or lower the whole keyboard pitch by 12 semitones up
or downwards in semitone increments.
To turn the transpose function on, press the [TRANSPOSE] button. The display shows
.
Use the rotary control [DATA CONTROL] to select the desired value; the respective
value is shown in the display, e.g. .
Optionally you can also select the desired value by keeping the [TRANSPOSE] button
pressed, and then press a piano key in the range of C2 to C4. That changes the pitch
as shown in the following table:
C2
C
#
2
…
C3
…
B3 C4
–12 –11
…
0
…
+11 +12
The [TRANSPOSE] button lights up as long as this function is activated. To
turn off this function just press this button again. The piano then returns to
the default setting.
Turn on
Set the pitch
Transpose
digital piano
22
To Next Page
Loading...
Need help?
General
