If split mode is active while selecting layer mode, the main voice will only be
assigned to the keyboard area to the right of the split point. The left hand
voice remains unchanged as it was set in split mode.
The main voice will be transmitted on the selected main MIDI send channel. The
second voice will be transmitted on the selected main MIDI send channel +2. That
means, if the main voice is transmitted on MIDI channel 1, then the second voice will
be transmitted on MIDI channel 3. Find more information on setting the main MIDI
send channel at
Ä
Chapter 17 ‘MIDI functions’ on page 30.
To quit layer mode select a single voice.
MIDI considerations
Exit layer mode
Layer mode
digital piano
20
To Next Page
Loading...
Need help?
General
