Parameter Factory default setting Retained after powering off
Split point Eb3 Yes
Main voice volume 127 No
Layer voice volume 100 Yes
Split voice volume 127 Yes
Metronome volume 127 Yes
Tuning 0 Yes
Tempo 120 Yes
Layer mode voice — —
Split mode voice 8 - upright bass Yes
Layer mode on/off Off No
Split mode on/off Off No
After powering up the following data will be sent to the sound engine, the USB MIDI
interface, and the MIDI output:
n Bank change MSB=0, LSB=0, PGM=0 - Setting internal sound engine to piano
voice
n Reverb default value
PGM Voice Reverb on/off Reverb depth Chorus on/off Effect depth
0 Piano 1 On 40 Aus 64
1 Piano 2 On 40 Aus 64
2 Electric Piano 1 On 40 Aus 64
3 Electric Piano 2 On 48 Aus 64
4 Church organ On 96 Aus 64
5 Electric organ On 40 Aus 64
6 Strings On 64 Aus 64
7 Upright bass On 32 Aus 64
MIDI- channel 10 (Metronome) off — 0 Aus 0
Parameter Default setting Value range
Octave shift 0 –3 to +3
Transpose 0 –12 to +12
Effects default settings
Additional default settings
Appendix
digital piano
44
To Next Page
Loading...
Need help?
General
