TV Setup
You can choose how pictures are displayed on your TV.
1. Press [MENU], select the SETUP menu and press [OK].
2. Now select TV SETUP and press [OK].
3. Now choose your type of TV. Use
//
and choose 16:9
for a widescreen TV or 4:3 for a conventional one.
4. Now choose how widescreen images appear. If your TV
is 4:3 use
//
and choose from Letterbox, Centre
Cutout (centre action only) or Full Frame (stretched).
5. To avoid screen burn on radio channels choose
RRaaddiioo
((BBllaannkk SSccrreeeenn))
to display a blank screen. Options are
OOffff,, IImmmmeeddiiaattee
or
DDeellaayyeedd
(screen blanks after a delay)
6. Now choose the Video Output mode. Use
//
to
choose from RGB (best quality pictures for TVs that
support it) or PAL (suitable for all other TV sets).
7. Use
//
to turn the
RR
FF MMoodduullaattoorr
On or Off.
8. The
MMoodduullaattoorr CChhaannnneell
is set by the factory to CH22. If
you wish to change the channel you tune your TV to (in
order to avoid interference), use
//
to adjust it.
9. To exit menu press [QUIT].
Languages
You can choose your desired languages for Sound, Subtitles
and Interactive (data) Services (depends on broadcast).
1. Press [MENU], select the SETUP menu and press [OK].
2. Select LANGUAGES and press [OK].
3. Select Subtitles, Data Services or Audio using
//
.
4. Use
//
to choose the desired language or Off to
suppress Subtitles.
5. To exit menu press [QUIT].
PIN number
You can choose a PIN (Personal Identification Number) for
use with parental controls. The receiver was originally
programmed with 1234. Change this number as follows :-
1. Press [MENU], select SETUP menu and press [OK].
2. Select PARENTAL CONTROL and press [OK].
3. Now enter the current PIN ****.
4. Select CHANGE PIN and press [OK].
5. Use 0..9 to enter a new PIN.
6. Use 0..9 to confirm new PIN. When confirmed, this
number is now stored. KEEP THIS NUMBER SAFE!
7. To exit menu press [QUIT].
AAddvvaanncceedd sseettuupp
Set-up
7
To Next Page
Loading...
