What to do if my THOMSON THT502 says 'No signal found'?
If your THOMSON Receiver displays 'No signal found', first ensure the aerial lead is properly connected. If it is, inspect the aerial for any damage or misalignment. If you are outside of a digital signal area, contact your dealer. Also, if using an active antenna, ensure the receiver’s Antenna Power is switched ON or that external power is connected.
Why is there no picture or sound on my TV from my THOMSON THT502?
If you're getting no picture or sound on your TV or amplifier when using your THOMSON Receiver, make sure the correct HDMI or SCART input is selected on your TV or amplifier. Also verify that your TV/amplifier is switched on and check the S/PDIF connection if it's in use. Additionally, ensure the unit's resolution is supported by the TV.
How to fix a THOMSON Receiver when the LED indicator is not lit?
If the LED indicator on your THOMSON Receiver is not lit, the mains lead may be unplugged. Check the mains plug to ensure it is properly connected.
To Next Page
General
