English
page up or down, use tu buttons to select subpages. Press or to get back to
viewing mode.
Some channels support a choice of subtitle languages. Press in viewing mode to
display a list of available subtitle languages. Select your subtitle of choice with pq and
press to conrm. Press to leave without making changes.*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely subtitles can
be activated via Teletext if available.
Timeshift allows you to pause live broadcasts and resume playback later. To activate this
function set the Timeshift mode in the DVR Setting menu to on by selecting Pause. For
details, see . Press 2 in viewing mode to activate Timeshift. The progress information
banner appears on screen. Live TV keeps playing for moment and will then pause. Press u
to resume Timeshifted playback. Press 3 to return to live TV.
Timeshift and its playback only work properly when a fast USB
storage device such as a USB2.0 HDD is connected to the
receiver. Timeshift and playback of HD content requires sufcient
read/write speed of the used USB storage device.
The Electronic Programme Guide is a very useful function that allows you to view event
schedules and programme information and to mark events/movies for recording. To access
the EPG, press the button in viewing mode. Use pq to select a channel and tu
to select an event. Press to display detailed information of the selected event. Use
to quit the detailed information screen. Press to access further step functions. Use
tu to select the desired step and to execute it. Press to quit the step function.
Press to set a timer for a selected event. Refer to section for details of the
timer function.
Availability of EPG data depends on broadcast.
Your new receiver allows you to make an instant recording of the programme you are
watching. Simply press 4 to start the recording. To enter the duration for the recording,
press 4 again. Use the buttons to enter the recording time and press to conrm.
At the beginning of the recording a recording sign will be shown for a short while on the
upper right corner of your TV screen. To stop the recording, press 3. Select Yes and press
again to stop the recording. It is possible to make 2 recordings at the same time if they
are broadcasted on same frequency. You can access the Record Manager via the
button, and select Record by pressing the button . See chapter for details.
*Please connect a USB storage device with sufcient free space before you start a recording.
To Next Page
Loading...
