What to do if my THOMSON THT501 Receiver remote control is not responding?
If your THOMSON Receiver isn't responding to the remote control, first, make sure the receiver is plugged in and turned on. Then, aim the remote directly at the front panel, ensuring nothing is blocking the signal. If it still doesn't work, check the batteries and replace them if necessary.
Why does my THOMSON Receiver say no signal found?
If your THOMSON Receiver displays a 'No signal found' message, first ensure the aerial lead is properly connected. Check the aerial for any damage or misalignment. If you are out of the digital signal area, check with your dealer. Also, if you're using an active antenna, verify that the receiver’s Antenna Power is switched ON or that the external power is connected.
What to do if there is no picture or sound on TV from my THOMSON THT501?
If you're not getting any picture or sound on your TV from the THOMSON Receiver, ensure that the correct HDMI input is selected on your TV or amplifier. Also, make sure your TV is switched on.
How to fix a THOMSON THT501 with a LED display that is not lit?
If the LED display on your THOMSON Receiver is not lit, the mains lead might be unplugged. Check the mains plug to ensure it is properly connected.
Why does my THOMSON THT501 Receiver turn off automatically?
If your THOMSON Receiver switches off automatically, the Auto Standby function may be enabled. Disable the auto standby function. See section 7.3.8 for details.
What to do if THOMSON THT501 loses reception after moving it?
If you've moved your THOMSON Receiver and can no longer receive digital reception, it's likely that the antenna signals are too weak. Press the INFO button on the remote 3 times to bring up the signal bars and adjust the antenna for maximum reception, or rescan the channels.
Critical safety precautions for receiver installation and operation.
Step-by-step instructions for setting up the receiver and connecting it.
Guide to connecting a terrestrial antenna for signal reception.
Connecting the receiver to your TV via HDMI, SCART, and Cinch cables.
Guided process for initial setup, language, and region selection.
Covers auto scan, channel scan, and antenna adjustment for channel setup.
Pausing and resuming live TV broadcasts.
How to record the current program immediately.
Accessing the channel editing menu and initial options.
Setting language, TV system, aspect ratio, and video resolution.
General| HDTV Compatible | Yes |
|---|---|
| EPG | Yes |
| USB | Yes |
| Optical Input | No |
| Type | Receiver |
| Video Output | HDMI |
| Audio Output | HDMI |
| Supported Resolutions | 576i, 576p, 720p, 1080i |
| Tuner Type | DVB-T2 |
| Connectivity | HDMI, USB |
| Functionality | Media Player |
To Next Page
