THOMSON THT501 - Connecting Your Receiver; Terrestrial Antenna Connection

CONNECTION
P5
English
10. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
11. MENU Opens the main menu, in menu you will get one
step back
12. EXIT/SORTIE Exits from the menu or submenu
13. GUIDE Shows the EPG (Electronic Programme Guide) in
TV mode
14. V+/V- Volume up/down
15. Mutes audio output of the receiver
16. P+/P- Programme ± (up/down in menu)
17. SUB Shows list of subtitled languages
18. TXT Shows Teletext on OSD (On Screen Display)
19. AUDIO Show the current audio channel or select left, right
or stereo
20. LIST Opens the Media Player list in viewing mode
21. OPT GOTO function in during playback
22. Changes Aspect ratio of Video between
available modes
23. : No function
24. 5 6 Fast rewind/Fast forward
25. " Performs slow motion in Record playback
26. 4 Records the TV programme to the connected
storage device
27. u Starts playback of the selected file in Media Player
or resumes play in Timeshift mode
28. 2 Pause or start Timeshift mode
29. 3 Stops playback of the selected file in Media Player
and Record playback
Stops Timeshift
30. RED Multimedia and Teletext functions
Opens the recordings list in viewing mode (If
storage device connected)
31. GREEN For Multimedia and Teletext functions
32. YELLOW For Multimedia and Teletext functions
33. BLUE For Multimedia and Teletext functions
3.0 CONNECTION
3.1 Connecting to a Terrestrial Antenna
Fig. 4
To receive broadcast signal, your terrestrial indoor or outdoor antenna must be
connected to the ANT IN connector on the back of the receiver. Use a properly
shielded antenna cable and suitable connectors.
The TO TV connector allows you to loop the antenna signal to a second receiver or
TV set.