To Next PageTo Next Page
Need help?Do you have a question about the THOMSON THS804 and is the answer not in the manual?
General| Video Output | HDMI, SCART |
|---|---|
| Resolution | Up to 1080p |
| Supported Resolutions | 576i, 576p, 720p, 1080i, 1080p |
| Tuner Type | DVB-S2 |
| EPG | Yes |
| Teletext | Yes |
| Type | Receiver |
| Supported Standards | DVB-S2 |
| Video Formats | MPEG-2, MPEG-4 |
| Audio Output | Stereo |
| Connectors | HDMI, SCART, USB |
| Storage | USB |
Provides essential safety guidelines for installation, operation, and handling to prevent hazards and ensure device longevity.
Instructions on proper packaging, unpacking, and storage of the device and its accessories to protect against damage.
Guidance for professional installation or a step-by-step process for self-installation of the terminal.
Lists all included accessories such as the user manual, remote control, batteries, and TNTSAT service card.
Recommendations for using USB devices, including compatibility, formatting, and potential operational limitations.
Details the front panel of the terminal, identifying key controls and indicators like the power button and display.
Describes the various connectors and ports on the rear of the terminal for connectivity.
Explains the functions of each button on the remote control for operating the terminal.
Instructions for connecting the terminal to a television using HDMI, SCART, or RCA cables.
Guide for connecting the terminal to an audio amplifier via S/PDIF or RCA audio connectors.
Details on connecting the coaxial cable from the satellite dish LNB to the SAT input.
Instructions for connecting and positioning an IR extender to control the terminal remotely.
Procedure for selecting the OSD menu language during the initial setup process.
Setting video output resolution, aspect ratio, and audio preferences during initial configuration.
Guide to setting up parental controls, including PIN codes and maturity levels for program access.
Instructions for setting and confirming a personal identification number for security and menu access.
Steps for aiming the satellite dish and adjusting its position for optimal signal strength and quality.
Displays the progress of the channel installation procedure on the screen.
Procedure for selecting regional channel variations associated with national channels.
Overview of the main menu structure, which contains various settings and functions.
Configuration of antenna parameters, including LNB type, frequencies, and switch settings.
Allows modification of the satellite list, including names, orbital positions, and transponders.
Steps for manually installing channels from a specific satellite and transponder.
Automatic update of the channel list for the TNTSAT service offer.
Setting video output resolution, SCART standard, aspect ratio, and audio output standards.
Modifying satellite lists, editing transponder parameters, adding, or deleting satellites.
Steps for manual channel installation, including scan modes and service types.
Process for automatically updating the TNTSAT channel list.
Selecting OSD menu, audio, and subtitle languages.
Activating/deactivating menu lock, changing PIN, and setting maturity levels.
Configuring GMT, time zones, daylight saving, and auto standby.
Displays hardware and software versions of the terminal.
Overview of organizing channels, including editing and favorites.
Renaming, locking, and deleting channels, with PIN protection for locked channels.
Creating and managing lists of favorite channels.
Classifying channels and changing their order, excluding TNTSAT channels.
