THOMSON THS220 User Manual (English)

Questions and Answers:

S
Scott Forbes DDSJul 29, 2025
What to do if there is no picture or sound on THOMSON Receiver?
- P
  pparkerJul 29, 2025
  If you're experiencing a lack of picture or sound on your THOMSON Receiver, here are a few things to check: * Ensure your TV is powered on. * Verify that your TV is set to the correct input. * Make sure the cables between the receiver and TV are firmly plugged in and that the mains lead is properly connected. * Check if audio muting is enabled by pressing the MUTE button. * Confirm the receiver is not set to DVD/VCR SCART input by pressing the DTV/VCR button.
K
kevinmartinAug 3, 2025
How to fix THOMSON THS220 Receiver no response to remote control?
- M
  Michael DaughertyAug 3, 2025
  If your THOMSON Receiver isn't responding to the remote control, try the following: * Ensure the receiver is plugged in and turned on. * Aim the remote directly at the IR sensor on the receiver. * Check for any obstructions blocking the IR sensor. * Replace the batteries in the remote control.
V
vincent44Aug 6, 2025
What to do if THOMSON THS220 has no picture?
- M
  Michele HarperAug 6, 2025
  If your THOMSON Receiver isn't displaying a picture, consider these potential causes and solutions: * The receiver may not be receiving a signal. Check the antenna cable, replace it if necessary, or ensure it's tightly connected to the receiver. * Incorrect tuner parameters could be the issue. Correct the tuner parameter values in the Installation menu. * The dish might be misaligned. Verify the signal strength and adjust your dish accordingly.
K
Karen RandallAug 11, 2025
Why does THOMSON THS220 Receiver switch to stand-by automatically?
- C
  Carolyn RogersAug 11, 2025
  Your THOMSON Receiver may be automatically switching to stand-by because the Auto Standby function is activated and has reached its set time (default is 3 hours). To resolve this, go to the System -> Auto Standby menu to adjust the auto power down time or disable the function completely.
T
Todd EvansAug 15, 2025
What to do if THOMSON Receiver external USB HDD does not start?
- J
  Jacob PrattAug 15, 2025
  If the external USB HDD isn't starting with your THOMSON Receiver, it might be due to high power consumption. Try connecting an extra power supply adapter to your USB HDD device.
T
Theresa CastanedaAug 19, 2025
How to fix THOMSON THS220 Receiver standby indicator not lighting up?
- C
  Cody MeltonAug 20, 2025
  If the standby indicator on your THOMSON Receiver isn't lighting up, check the following: * Ensure the mains lead is plugged in and the multipoint connector is switched on. * Verify that the front panel switch is in the ON position.
L
lpalmerAug 25, 2025
What does scrambled channel message mean on THOMSON THS220 Receiver?
- D
  Danielle SolomonAug 25, 2025
  A 'scrambled channel message' on your THOMSON Receiver indicates that the channel you are trying to view is scrambled. Select an alternative channel.

THOMSON THS220 Specifications

General

Signal source	Satellite
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL
Digital signal format system	DVB-S2
Personal Video Recorder (PVR) included	-
Product color	Black
Number of tuners	- tuner(s)
Parental control	Yes
Audio output channels	- channels
Audio formats supported	MP3, WMA
Image formats supported	BMP, JPEG XR
Video formats supported	AVI, DAT, MP4, MPG, TS, VOB
SCART ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Ethernet LAN	No
Power consumption (standby)	1 W
Power consumption (typical)	6 W
Operating relative humidity (H-H)	10 - 85 %