EasyManua.ls Logo

THOMSON THS220 - 8.0 TROUBLESHOOTING; Common Issues and Resolutions

THOMSON THS220
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
P23
English
Discard - displays the picture in full screen mode.
7.7.3 Movie Subtitle
This subtitle function is only relevant in the Movie menu for movies which contains
subtitle files in.srt or txt format.
During playback, press SUBTITLE to select language and confirm with OK. During
playback of Movie files you can press SUBTITLE twice to change the subtitle
settings described below:
Subtitle Specific: Choose subtitle size between Small, Normal and Big.
Subtitle BG: Choose subtitle background between White, Transparent,
Gray and Yellow-Green.
Subtitle Font Colour: Choose subtitle font colour between Red, Blue, Green,
White and Black.
7.7.4 Format
WARNING: The format function will delete all data and information from your
USB device or selected partition. THOMSON will not take any
responsibility for damaged or lost data on the USB device.
If you have multiple partitions on your storage device, select the partition you want
to format and press OK to continue. An attention banner will now be displayed.
Press OK to start formatting (or EXIT to cancel). The format procedure will take
some time, depending on the size of the used storage device. At the end of
process the “Formatting is complete” message will appear. Press EXIT to exit
the menu.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check
the receiver according to the procedures shown below. If the receiver does not
work properly after checking it, please contact your local Service line or THOMSON
dealer. Alternatively you can send a support mail via our website: www.thomsonstb.
net. NEVER open or disassemble your receiver. This may cause a dangerous
situation and will void the warranty.
PROBLEM POSSIBLE CAUSE WHAT TO DO
Standby
indicator does
not light up
Mains lead unplugged/
multipoint connector
switched off.
Check mains lead/switch
multipoint connector on.
Front panel switch is in OFF
position.
Set front panel switch to ON
position.

Related product manuals