P10
OPERATION
selected pages directly, as indicated on the bottom of the teletext screen. Press
TEXT again or EXIT to go back to viewing mode.
6.5 Subtitles
Some programmes support a choice of different DVB subtitle languages. Press the
SUBTITLE button in viewing mode to display a list of available subtitle languages.
Use pq to select the subtitle language and confirm with OK.
6.6 Changing the Aspect Ratio
To change the Aspect Ratio while watching TV, simply press the YELLOW button in
viewing mode. Each press will switch to the next format. Please refer to section 7.2
for more details.
6.7 Changing the resolution
To change the Resolution while watching TV, simply press the GREEN button in
viewing mode. Each press will switch to the next format. Please refer to section 7.2
for more details.
6.8 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to
watch programme schedules and information on screen. Press the EPG button
to activate this guide (you can also enter the EPG via the menu, too). Use pq
tu to select a channel and RED to move the highlight to the programme list. In
the programme list, use pq to select or scroll through programmes and tu to
display programme information for the next/previous days. Use BLUE to display
detailed information about the selected programme. If there is more than one page
of information, use tu to scroll.
NOTE: Availability of EPG data depends on broadcast.
Booking a programme from EPG
Select a programme as described above. Press OK when you have selected the
programme. This will lead you to the Timer (Schedule) menu. All details are already
filled in for you. Save the timer with OK. To display the list of booked events just
press the BLUE button in the channel list part of the EPG or in viewing mode.
Please refer to section 7.4.1 for more details.
6.9 Favourite channels
Use the FAV button to access your favourite channels and to toggle between
available favourite groups. Please refer to section 7.1.1 for details on how to create
favourite lists.
6.10 Changing between DTV/VCR contents
The receiver has the possibility to loop through the signal from the VCR SCART
input to the TV SCART. This allows you to watch content from the connected DVD
or VCR recorder via the receiver.
To Next Page
Loading...
