OPERATION
P9
English
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use pq to highlight your
channel of choice and press OK once to select the highlighted channel. The
channel list is equipped with a Find function to make it easier to find a certain
channel. Press RED in the channel list. An alphabet banner will now be displayed.
Use pq to select the first letter (or letters) of the channel and OK to confirm.
All channels beginning with the chosen letter(s) will now be displayed. Close the
alphabet banner by moving the highlight to OK. Now press OK and select the
channel in the filtered list.
The following buttons are available in the channel list and viewing mode:
RED: Opens an alphabet banner for quickly finding a channel
TV/RADIO: Toggles between TV and radio channels
GOTO: Opens the Satellite List for satellite selection
In viewing mode:
FAV: To switch to one of the available favourite lists.
6.1.3 Using the pq buttons
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the RECALL button
Use the RECALL button for switching between the last viewed channels. Please
refer to section 7.6 for more details.
6.2 Info Banner
At any time during viewing mode you can press the button to get information
about the current channel as well as the current and following programme*. Press
twice to view detailed info on the current and following programmes and technical
details about the current channel. Press again or EXIT to close the information.
You can change the on screen duration of the info banner in the Option menu.
Please refer to section 7.5 for more details.
*Programme information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To
select another audio stream, press AUDIO in viewing mode. A list with available
audio streams will now be displayed. Use pq to select a stream and confirm
with OK. With the tu buttons you can select between mono left, mono right or
stereo audio.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TEXT
button in viewing mode and use the 0~9 or pq buttons to select the number of
the page you want to see. Subpages (if loaded and available) can be selected with
the tu buttons. The coloured buttons of the remote control allow you to jump to
To Next Page
