THOMSON THS804 - Language Options; Parental Control Features; Time and Standby Settings; System Information Display

connected to the terminal in order to select the corresponding settings. You can also adjust the
display time of the information banner and the transparency level of the OSD menu.
P8
MAIN MENU
Select your preferences using thebuttons ◄ ► and press OK to confirm and continue with
the installation.
Once your settings are complete, press the RED or GREEN button to save the settings.
5.2.2 Language
In this menu you can select the language of the OSD menu, audio and subtitles. Move the
cursor using thekeys ▲ ▼ ◄ ► to change the values. Press the RED or GREEN button to
save the settings.
Switch the subtitle language to Off if you do not want subtitles.
Press the RED or GREEN button to save the settings.
5.2.3 Parental control
This menu allows you to activate or deactivate the menu lock, modify the PIN code and
define the maturity level.
You will be asked to enter the Pin code to access the Menu.
Verrouillagemenu If enabled, the terminal will ask for a PIN code to access the main menu.
Activate this function to prevent others from changing your settings.
Change PIN code If you want to change the PIN code, enter the current PIN code in thefield
Current PIN code, then enter the new PIN code in thefield New PIN code
and confirm the new PIN code in thefield Confirm PIN code
Maturity level Some programs are not intended for children. Choose an age group from the
list offered (10; 12; 16; 18) so that parental controls
prevent your children from watching programs that do not correspond to
their age group. If the content of the program is intended for a higher age
category than that authorized in the terminal, the PIN code must be
entered
before the audio and video can be displayed
5.2.4 Time settings
GMT If set to On, the time will be automatically set at start-up. If GMT is Disabled, after
shutdown of the power supply all date and time data will be lost. They have to be sorted out
again.
Time Zones You must select your time zone if you do not choose Auto
Time. Daylight SavingYou must set Daylight Saving Time to On if available.
Local date Set this field If GMT is set to Off
Local time Set this field If GMT is set to Off
Auto standby Helps you reduce your energy consumption. This option will put the
terminal in standby if no command is carried out for a previously set time, the
possible settings are OFF / 1/2/3/4/5/6 hours.
Press the RED or GREEN button to save the settings.
5.2.5 System Information
This menu indicates the hardware and software versions of the terminal.
5.3 Channel organization
On thescreen Main Menu, select ▲ ▼ to select the organization and press OK or ► to access
the menu, which consists of thesubmenus Edit channelschannels, Favorite manager, Sort
channels and ChannelEdit regional.