MAIN MENU
P19
English
Use pq browse the connected USB device and use OK to open folders. Press
OK to play the highlighted selection.
The help banner at the bottom of the screen explains all buttons used in the Media
player. Press EXIT/SORTIE to quit.
NOTE: You can also access the Media Player root from viewing mode with
the LIST key on the remote control.
7.6.2 Record Manager
The Record Manager gives you access to previously recorded events.
Select Record Manager from the Media+ menu and press OK to enter.
Use pq to highlight the recording you wish to play and press OK start playback.
Press EXIT/SORTIE to exit.
During playback, it is possible to perform the following actions:
2 To pause the playback.
u To resume playback.
5 6 For fast forward or fast rewind during playback.
RED Press to stop playback and return to
Record Manager.
When the timer banner is on screen (activated by pressing u or
), the following
actions are possible:
tu and press OK to jump forwards and backwards in time during playback.
1 = Set marker point in play back, press again to delete marker point.
2 = Jump to next marker point.
3 = Jump forwards in time. (See details in 5.5.4 Record Settings under Steps to
(min:).)
NOTE: You can also access the Record Manager from viewing mode with
the RED key on the remote control. The help banner at the bottom
of the screen explains all buttons used in this record manager to
edit. Press EXIT/SORTIE to save the settings and quit the menu.
7.6.3 DVR HDD Information
This option shows relevant information about the connected USB device.
Select DVR HDD Information from the Media+ menu and press OK to enter.
Press EXIT/SORTIE to leave.
7.6.4 HDD Format
The HDD format menu allows you to format the connected USB device.
WARNING! Formatting will permanently delete ALL data stored on the
connected device. Please make a backup copy of all data you wish
to keep before entering the HDD Format menu. THOMSON cannot
be held responsible for loss of data from USB devices used with
this receiver.
To Next Page
Loading...
