MAIN MENU
P15
English
type HDMI is selected, then on TV SCART only the
CVBS signal is available.
Digital Audio Output: Toggles between PCM and Bitstream output.
When PCM is selected, all audio will be converted
to stereo audio. Bitstream enables multi-channel
audio on the digital output to be used with home
cinema sets.
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to On for broadcaster defined time or to Off to
input time and date manually.
GMT Offset: Allows you to adjust the time zone you live in. This
option is only available when GMT Usage is set to
On. The GMT Offset range is “-11:30 ~ +12:00”,
increasing by half hours progressively. The cities
matching the set GMT Offset are displayed at the
bottom of the screen.
Summer Time: Select Off or On to add one hour extra for summer
time during the summer.
Date: Date and Time settings are available only when
GMT Usage is set to Off. Use the 0~9 buttons to
enter the date. Press EXIT/SORTIE to proceed.
Time: Date and Time settings are available only when
GMT Usage is set to Off. Use the 0~9 buttons to
enter the time. Press EXIT/SORTIE to proceed.
Time display Set to On, time will be shown on screen, select Off
to remove.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up
the receiver.
Use pq to select Timer Setting from the System Setup menu and press OK
to enter.
The receiver will display a list with 8 timers, followed by their respective status.
Select the timer you
wish to set or change with pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off (Timer inactive), Once, Daily
(Timer will be executed every day, same time) or
Weekly (timer will be executed every week, same
day, same time)
To Next Page
Loading...
