THOMSON THT502 - Rear Panel; Remote Control



3.  RED indicates that the receiver is in STANDBY mode.
GREEN indicates that the receiver is in OPERATING mode.
*THT505

Fig.2
1.  Connector for USB storage devices.
2.  To connect to your antenna for reception of broadcasted signals.
3.  To connect the terrestrial antenna signal to your TV set. This
connection will allow you to watch digital terrestrial programmes
depending on the tuner of your TV and local broadcast conditions
4.  To connect your receiver with your TV set using an RCA cable.*
5.  To connect your receiver with your TV set using an RCA cable.*
6.  To connect your receiver to a digital home theatre, AV receiver or
digital audio amplier.
7.  To connect your receiver with your TV set using an HDMI cable.
8.  To connect your receiver with your TV set using a SCART cable.
9.  To connect your receiver to an analogue audio amplier.**
10.  Your receiver requires a supply voltage of 220~240 V AC
(Auto-selectable), 50/60Hz ±5%. Please ensure the local power
specication meets these requirements before connecting your
receiver to the wall outlet.
*THT505
**THT502

Fig.3
1. q Switches the receiver On/Standby
2. Mutes all audio outputs of the receiver
3.  Opens the favourite group selection
4.  Opens the Record list
5.  Opens the audio language selection
6. Back to previously watched channel
7.  For Multimedia and Teletext functions
8. Opens the current channel information; 2x opens the current
event information and 3x the signal information
9.  Opens the EPG (Electronic Programme Guide) in TV mode
10. pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
11. tu Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specic menus
12.  Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
13.  Opens the main menu, in a menu you will get one step back
14. Exits from the menu or sub-menu
15.  Increases/decreases the volume level
16.  Page up/down in all list modes
17.  Page up/down in all list modes
18.  Enters a channel number in viewing mode or a value inside the
respective menu