Select Upgrade by USB from the Tools menu and press to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the le containing the latest and
correct software.
Once all settings are made, move the highlight to Start and press to start the
upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn ash?”. Select Yes to nalize
the upgrade or No to quit without upgrading.
If, after a software upgrade, the receiver should behave in an
unexpected way, please perform a factory reset as well. See
chapter .
After an update the receiver restarts automatically. During the
upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver and
will void warranty!
Your receiver is equipped with two games which can be played on your TV screen using the
receiver remote control.
Use pq to select Games from the Main menu and press or u to proceed.
Select one of the available games (Othello or Sudoku) using pq and press to start the
game. Follow the directions on screen. Press to quit a game.
The Media menu consists of the following submenus: Media Player, HDD Information, DVR
Setting and Remove USB device safely.
Use pq to highlight the menu of choice and press to enter. Press to quit.
This function allows playback of different kind of les from the connected USB storage
device. In the Media menu, select Media Player and press to enter this menu.
When entering the media player, the highlight is on the USB storage device. Press q and
to open the directory respectively its folders/subfolders.
First select which les you like to play back. Use the button to switch between Video/
Record/Music or Image. Press pq to select a le or folder and then press to open the
folder/subfolder (if applicable) or start playback of the le. Press the button to exit.
Use the buttons like described below in order to choose functions during the different
playback modes (like described in the help banner below):
Press the button to set repeat mode. The options are repeat
folder folder icon/repeat once 1 or no repetition (no icon shown).
During the playback of a movie with external subtitles, press
to enter the subtitle menu. In this menu you can select size and
colours of your preference.