49
1. Press the button at the bottom of the touch panel
to power up the display.
2. Select MyRV Control Panel from the menu list-
ing on the screen.
3. Then select the Leveler icon.
The following functions can be operated using the
OneControl Touch Panel inside the RV. Refer to the
Lippert Ground Control 3.0 manual for complete in-
structions.
Standard Mode and Menu
Basic Jack operation
Unhitching instructions
Auto Leveling
Hitch Recognition
1. Download the OneControl App for your device from Google Play Store or Itunes.
2. To access the OneControl App, ensure there is pow-
er to the RV’s wireless network hub.
3. Navigate to the device’s Wi-Fi settings (on the
phone, tablet, etc). Turn the wireless feature on and
connect to the MyRV wireless network.
4. A password will be required to access the network.
The password is found on the RV’s wireless hub (8
capital alpha characters).
5. Open the OneControl App on the phone or tablet.
6. The App will request the user to “Agree” with a li-
cense agreement, connect to the MyRV system by
entering the PIN (default is 1,2,3,4 for OneControl Touch Panel). Then it will prompt
you to create a new PIN and then re-enter the new PIN.
The PIN is not needed or asked for if the tablet is attached to the
docking station and connected to the USB cable inside the RV.
Refer to the Lippert Ground Control 3.0 manual included in our
warranty packet for complete instructions on the following procedures.
To Next Page
Loading...
