Page 35 ETN040053-D03
K-Cube Inertia Piezo Motor Driver
5.8 Current Limits During High Frequency Operation
Caution
During high frequency operation of two simultaneous channels, the unit can
typically draw above 1.2 Amps from the power supply. During this operation very
large peak currents can flow in the ground return, which are continually
monitored. During periods of intense operation, an internal safety circuit may
switch off a drive channel automatically to keep the current within safe levels.
In this case, the drive channel can be restored by clicking the Stop button on the
associated GUI panel.
To Next Page
Loading...
