THORLABS TXP5004 - Ordering Codes and Accessories; Requirements; Hardware Requirements; Software Requirements

© 2017 Thorlabs GmbH
1 General Information
5
1.2 Ordering Codes and Accessories
Ordering code:
TXP5004 4 Channel USB T&M Mainframe
Accessories:
TXP5000C Blind module to cover empty module slots (for TXP5004 and TXP5016)
1.3 Requirements
These are the requirements to the PC intended to be used for remote operation of the
TXP5004.
1.3.1 Hardware Requirements
CPU: 1 GHz or higher
RAM: 256 MB
Graphic card Min. 32 MB memory
Hard disc Min 100 MB free storage space
Interface Free USB2.0 port, USB cable according the USB 2.0 specification
1.3.2 Software Requirements
The TXP5004 software is compatible with the following operating systems:
· Windows
®
7 (32-bit, 64-bit)
· Windows
®
8.x (32-bit, 64-bit)
For operation of the TXP5004, also an NI-VISA (version 5.4.1 or higher) is required. This NI-
VISA engines comes with the Thorlabs GmbH TXP5004 installation software package, but can
be downloaded also from National Instruments' website www.ni.com.