LDC401 & LDC401A Automated Cleavers Chapter 4: Set-up
Page 6 TTN100064-D02
Chapter 4 Set-up
4.1. Initial Set-up
1. Plug in the AC power cord. The power supply
accepts an AC input of 100 - 240 VAC; 47 -
63 Hz.
2. Connect the AC power cord to the external
power supply.
3. Connect the DC power cable to the unit.
4. Locate the USB cable that has a microUSB Type
B plug. Plug it into the power socket of the tablet.