LDC401 & LDC401A Automated Cleavers Chapter 3: Description
Page 4 TTN100064-D02
Check to make sure that you have the following items:
Cleaver12V Power Supply
Line Cord
Tablet Controller
USB Cable (for tablet data)
USB Cable (for tablet power)
Stand for tablet
Nylon brush
0.035″ Hex Key
0.050″ Hex Key
3/32″ Hex Key
Top inserts (purchased separately)
Bottom inserts (purchased separately)
Canvas Bag
Figure 2 The LDC401A with Included Accessories
If you are missing any of the accessories or need replacements, please contact the distributor from whom you
bought the cleaver. Visit https://www.thorlabs.com/locations.com for contact information.
Note: Please save the packaging material and pink anti-static bag for returning the unit back to Vytran
®
for service.
This packaging will reduce the risk of damage during shipment.
Figure 3 These Packaging Materials Should be Saved