www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
Chapter3 Process of Installing
3.1 Unpacking
You receive your THUNDER LASER NOVA-24 packed in a wooden box, which contains
the laser machine and additional accessories. The following steps give you an overview of
the unpacking and assembly of the laser. Please follow these steps carefully.
Keep the packing box. You will require it in case of a return.
Dispose all waste according to the applicable waste disposal law.
1. Put the wooden box on a flat and spacious room for unpacking.
2. Remove the machine box; carefully remove the foam material, which protects the
viewing window of the cover and around the machine.
3. Take out the key，open the door of the laser，Remove the accessories box which
contains all accessory parts required for the installation of the laser machine.
And check if there’s anything damaged or missed during shipping.
4. You will see an attachment table on the machine; please check whether the
accessories are all on the table.
5. Please keep the keys and the warranty certificate well (and please show us your
warranty certificate if you need tech support for the machine failure, then we will provide
you the best technical service).
6. Remove the sponge and nylon cable ties from inside the machine, and then start to
install the machine (below chapters are installation details)
To Next Page
Loading...
