www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
3.8.3 Connecting the Exhaust System
How to set up the exhaust system
Insert one side of the gray exhaust pipe into the fan inlet and the other side into the
fuselage behind the exhaust tank. Insert one side of the gray exhaust pipe into the fan
outlet and put the other side of the pipe outside where you work (If the machine is far from
the outside of the room that the gas manufactured by the machine cannot be discharged;
then you might need an dust/fume filter, it can keep the air quality of your working
environment well).
Please refer to the following pictures about how to install the exhaust pipe:
Also you can refer to the video on how to set up your Nova laser machine in our website
http://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cut
ter.html
To Next Page
Loading...
