Thunder Laser NOVA-24 - The Main Interface

THUNDER LASER
NOVA-24
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
44
4.4.2 The main interface
When the system is powered on, the screen will show as below:
File
：
Speed
：
MaxPow ：
01
300mm
/s
30
.0
%/
30.
0
%
X：
Y
：
Z
：
150.2
153
.5
3000
mm
mm
mm
01 400 25
.0
02 200 29.
1
03 100 31
.5
Idle
00
.00
.
00 Count: 99 X : 180. 5 mm Y: 235
.
6 mm
connect
Graph display
area
Graph layer
parameters
Running
Status
Working
Number
Running
parameters
Net Status
File dimension
Coordinate
Running
progress bar
 Graph Display Area: To display the whole file’s track, and display the running
track.
 Running parameters: To display the running file’s file number, speed, max power
etc.;
 Coordinate: To display the current coordinate of X,Y and Z axes
 Graph layer parameters: To display the layers’ information of the current file,
such as max or min power, speed etc.. When system is idle, dblclick the layer,
then users can change the layer’s parameters and the changing would be
saved.
 Running Status: To display the current status of the machine, such as Idle, Run,
Pause, Finish, etc.;
 Running Progress Bar: To display the progress bar of the current running file;
 Working Number: To accumulate the work number of the current file.
 File Dimension: To display the dimension of the current file;
 Net status: To display the connecting status of the Ethernet.
When work is Idle or finished, all buttons can be clicked, users can select a file to run, set
some parameters, preview to a select file etc. But, when work is running or paused, some
buttons don’t respond when they are clicked.