www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
4.4 How to use the display
4.4.1 Function of the Buttons
Arrow buttons: control the movement of the laser
head.(also can be used to change the parameters in the control panel)
Z/U button: The Z/U key can be pressed when the system is idle or the work
is finished. On pressing this key, it will show some entries in the interface, each entry
includes some functions, Z axes move, U axes move, each axes to go home etc.
Reset button: Reset the machine.
Pulse button: Pulse a laser beam.
Speed button: Set the speed of the current running layer, or set the arrow
buttons’ move speed.
To Next Page
Loading...
